VEKA PVC-U entrance door systems
European vinyl uPVC entrance doors for Ontario homes.
ECOWIN plans reinforced uPVC entrance doors with real VEKA profile geometry, low-maintenance exterior finishes, warm thresholds, multi-point hardware and glass packages built for Canadian comfort.
Why vinyl doors
Warm, stable and low-maintenance entrance systems.
For ECOWIN, a vinyl entrance door is not a simple builder-grade slab. It is a planned European PVC-U door system: reinforced profile, sealed corners, correct threshold, strong hinges, multi-point locking and a glass package selected for the exposure of the home.
Profile system
VEKA Softline 82 entrance door profile
Softline 82 is VEKA’s 82 mm PVC-U door platform for premium entrance doors. ECOWIN uses this type of profile direction when a homeowner wants insulation, clean European proportions and long-term surface stability.
- 82 mm construction depth for warm door planning.
- Door fillings can be specified for the project design.
- Reinforcement and hardware are selected to suit size and use.
Door planning
Entrance doors with sidelites, panels or glass inserts
The door can be planned as a clean solid panel, a glazed door insert, or a composition with sidelites and transoms. ECOWIN checks the opening, threshold height, drainage and locking layout before ordering.
- Good fit for front entries, garden doors and side entrances.
- Low-maintenance exterior surface compared with painted wood.
- Coordinated colours can be planned for windows and doors.
Glass package
Warm 2-chamber triple glass for doors
Glazed sidelites and door inserts can be built with a warm triple-pane unit: three panes of glass, two argon chambers, warm edge spacer bars and coatings selected for the side of the house.
- Low-E energy coating is planned on glass 1 and glass 3.
- The centre pane remains clear glass.
- Optional Solar multifunctional coating is selected only when needed.
Warm glass unit
Triple-pane comfort for glazed door areas.
When a vinyl entrance door includes glass, the sealed unit matters. ECOWIN can plan two argon chambers, Swisspacer warm edge spacer bars and coatings that support winter comfort without turning the entrance into a cold point.
Low-E energy coating
clear centre glass
Low-E energy coating
Swisspacer warm edge spacer bars around the sealed glass unit
Energy Low-E coating
Low-E coating helps reflect long-wave heat back toward the room in winter. For ECOWIN triple-pane planning, it is shown on glass 1 and glass 3, while the centre glass stays clear.
Optional Solar multifunctional coating
Solar coating is selected only when the customer wants it. In winter it still supports energy performance; in summer it helps reduce overheating, UV exposure and glare on sun-facing elevations.
Argon and warm edge
Two sealed argon chambers slow heat transfer through the glass. Swisspacer warm edge spacer bars reduce the cold bridge at the perimeter of the insulated glass unit.
Vinyl door consultation
Bring the door opening, colour idea and glass direction.
ECOWIN can match the entrance door system with vinyl windows, sidelites, warm glass, Swisspacer spacer bars and the correct installation detail for Southern Ontario homes.
Manufacturer references used for technical direction: VEKA Softline 82 front doors and Swisspacer warm edge spacer bars.
